Reach in Cooler Repair Phoenix
Reach in coolers in Waco are hard working machines that need regular service to keep operating at optimal performance. Terry's AC & Refrigeration Refrigeration specializes in fixing all brands and models of restaurant and commercial reach in coolers and refrigeration.
Reach in Cooler Repair Phoenix
If your restaurant or commercial reach in cooler doesn't cool efficiently, the fan doesn't work or you have any other reach in cooler problems, simply call us. Terry's AC & Refrigeration is available 24/7 for any reach in cooler repair in Phoenix, AZ, and surrounding areas.
Troubleshoot Reach-In Cooler
If you're experiencing issues with a reach-in cooler, here are some common troubleshooting steps you can take:
- Power Supply: Ensure that the cooler is properly plugged into a functioning power outlet. Check if there is power to the outlet by plugging in another device. If there is no power, check the circuit breaker or fuse box to see if a breaker has tripped or a fuse has blown.
- Temperature Settings: Check the temperature settings on the cooler. Make sure the thermostat is set to the desired temperature and hasn't been accidentally adjusted. The recommended temperature for most refrigerated goods is between 35 and 38 degrees Fahrenheit (1 to 3 degrees Celsius).
- Door Seal Inspection: Inspect the door seal or gasket for any damage, wear, or debris. A faulty seal can cause cold air to escape and warm air to enter the cooler, leading to inadequate cooling. Clean the seal and ensure it is properly aligned and tightly sealed when the door is closed.
- Airflow and Ventilation: Check if there is proper airflow inside the cooler. Ensure that the vents and air circulation fans are not blocked by items stored inside. Blocked vents can restrict airflow and hinder proper cooling. Rearrange items to allow for proper air circulation.
- Condenser Coils: Locate the condenser coils, usually at the back or bottom of the cooler, and check for dirt, dust, or debris buildup. Clean the coils using a soft brush or vacuum cleaner to maintain optimal heat exchange and improve cooling efficiency. Be gentle to avoid damaging the coils.
- Evaporator Fan: Listen for the sound of the evaporator fan running. If the fan is not functioning, it may need to be replaced. A faulty fan can cause poor airflow and inadequate cooling. Consult a professional technician to diagnose and repair the fan if necessary.
- Refrigerant Levels: Low refrigerant levels can lead to insufficient cooling. If you suspect this is the issue, it's best to contact a professional technician to check and recharge the refrigerant if needed. Handling refrigerant requires specialized knowledge and equipment.
If the troubleshooting steps above do not resolve the issue or if you are unsure about performing any of these tasks, call Terrys A/C & Refrigeration now and we will take care of any issues you may have!
Reach in Cooler Repair Phoenix
When your company depends upon its refrigeration system, reach in cooler, cold storage units, or other system, our repair solutions will save you time and money. BEFORE you spend money to replace, give us a call or send us an email to speak with a customer service representative.