If your Manitowoc ice machine has stopped making ice, is showing an error code, or is
producing less ice than usual, Austin Refrigeration repairs Manitowoc units across the
Austin metro — for restaurants, bars, hotels, and convenience stores from downtown and
Rainey Street to North Austin, Round Rock, Georgetown, Pflugerville, and Cedar Park.
Most Austin-core calls get a technician on-site the same day, often within 2–4 hours.

Call (512) 764-1982 for Same-Day Manitowoc Repair

One Thing Every Manitowoc Owner in Austin Should Know

Manitowoc evaporators have a nickel plating that requires a nickel-safe descaler —
standard acid-based cleaners can damage the evaporator over time. Given how hard
Austin's water is, regular nickel-safe cleaning is one of the most effective things
you can do to prevent slow ice production and premature evaporator wear. We use the
correct nickel-safe cleaning products on every Manitowoc service call.

Manitowoc-Specific Issues We Diagnose and Fix

Modern Manitowoc units — including the Indigo, Indigo NXT, and NEO series — use an
"E"-prefix error code system to flag specific faults, such as ice probe faults or
water system faults. Reading these correctly means we can often diagnose the issue
from the control panel display before opening any panels, which saves time and cost.

"My Manitowoc isn't making ice at all"

Before assuming a major failure, we check the basics: is the water supply valve open,
is the unit receiving power, and is the condenser clean. Beyond that, common causes
include a tripped breaker, a closed or restricted water valve, or a refrigerant issue.
Simple causes are often resolved the same visit.

"My Manitowoc is producing less ice than normal, or ice is slow"

Reduced ice production is frequently tied to a dirty condenser, scale buildup on the
nickel-plated evaporator from Austin's hard water, or rising air/water temperatures
during Austin summers, which increase the load on the machine. Nickel-safe descaling
and condenser cleaning typically restore normal output.

"My Manitowoc is leaking water"

Leaks are among the most common Manitowoc service calls we see, usually from a water
line, drain, or an internal seal issue. Because leaks and electrical faults can pose a
safety risk, we recommend shutting the unit down and calling for service rather than
continuing to run it.

"My Manitowoc is showing an error code (E19, E20, or similar)"

Manitowoc's "E"-prefix codes point to specific faults — for example, an ice-probe
fault or a water-system fault where the control board isn't detecting water reaching
the high-level probe in time. We diagnose against your specific model (Indigo, Indigo
NXT, or NEO) rather than guessing from the code alone, since the right fix depends on
which sensor, valve, or board is actually at fault.

Typical Response Times

• Downtown, East Austin, South Congress, Rainey Street: same-day,
  typically within 2–4 hours
• North Austin, Cedar Park, Round Rock: same-day, scheduled within
  the day's northern route
• Pflugerville, Georgetown: same-day in most cases; priority
  next-morning slot for late-afternoon calls
• After-hours, weekends, holidays: 24/7 emergency dispatch —
  call (512) 764-1982 any time

Who We Serve

We repair Manitowoc ice machines for restaurants and kitchens, bars and breweries,
hotels, convenience stores, and healthcare facilities throughout Austin, Round Rock,
Georgetown, Pflugerville, and Cedar Park.

We Also Repair These Brands

• Hoshizaki ice machine repair
• Scotsman ice machine repair
• Manitowoc ice machine repair
• Ice-O-Matic ice machine repair
• Kold Draft ice machine repair

See our full ice machine repair services page for Austin.

What Austin Businesses Say

"One of the Best Refrigeration Repair Companies I have ever worked with" — Bo Bryan

[Add 2–3 more real customer reviews here if available.]

Frequently Asked Questions

How much does Manitowoc ice machine repair cost in Austin?

Most Manitowoc repairs run $150–$450 depending on the issue — a water valve or filter
fix is on the lower end, while compressor, sealed-system, or evaporator repairs cost
more. We quote the price before starting work.

How fast can you get to my business?

Most Austin-core calls get same-day service, often within 2–4 hours. Call
(512) 764-1982 for a current estimate.

Why does my Manitowoc need a special cleaning product?

Manitowoc evaporators have a nickel plating that standard acid-based descalers can
damage over time. We use nickel-safe cleaning products on every service call to
protect the evaporator and extend the machine's life.

Do you repair other ice machine brands too?

Yes — we also repair Hoshizaki, Scotsman, Ice-O-Matic, and Kold Draft commercial ice
machines throughout the Austin area.

Manitowoc Ice Machine Down? Get Same-Day Help

Call (512) 764-1982 now to schedule same-day or emergency Manitowoc ice machine repair
anywhere in the Austin area.

Call Now
Request Service Online